S150C - FHC S150 Series Acetic Cure Silicone Sealant - Clear - Compare to 33SC

• Compare to CRL Clear 33S Silicone Sealant 33SC
• Excellent Adhesion To Glass - Professional Grade
• Window and Door Approved
• Mildew Resistant, For Interior and Exterior Use
• Non-Sag & Slump- Easy Tooling and Easy Cleaning
• Available in Five Colors
• 24 Month Shelf Life / 10 Year Warranty
• Acetic Cure Sealant

Downloadable Documents

• FHC S150 Safety Sheet (4861KB)
• Sealant Compatibility Test With SentryGlas® Interlayer (9135KB)
• FHC Sealant Guidelines Comparison Chart (120KB)
• FHC S150 Technical Data Sheet (26KB)
• FHC Sealant LEED® Information (276KB)

Overview

S150 provides excellent adhesion to glass, tile, cultured marble, vinyl, aluminum, and sheet metal, without the need for a primer. The product is engineered to cure rapidly when exposed to atmospheric moisture, and to form a durable, tight, bond, that glazers, contractors, and installers, count on. It is not for use when glazing insulated units. Not recommended for structural glazing or insulated glass, laminated glass (approved for use with SentryGlass® Interlayers), mirror installations or aquariums.

Material/Construction

Meets ASTM C-920, Type S, Grade NS, Class 25, Use NT, M, G, A, O; TT-S-00230C & TT-S-001534A (COM-NBS) VOC: 3.47%, UV Resistance: Excellent, Movement: +/- 25% Hardness: (Shore A) 20 +/-25%, Peel Strength: 19 psi, Tensile Strength: 375 psi, Staining: None, Service Temperature: -40 deg. F to 450 deg. F

Hazard Statement

Classification: This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Skin sensitization: Category 2 Serious eye damage/eye irritation: Category 2A Aspiration toxicity: Category 1 Emergency Overview: Signal word - Danger Hazard Statements: Causes skin irritation; Causes serious eye irritation; May be fatal if swallowed and enters airway Appearance: Varies Physical State: Paste Liquid Odor: Acetic

Surface Preparation

The substrate must be clean, dry, frost-free, sound, and free of any oils, greases, incompatible sealers, paints, or coatings that may interfere with adhesion. Do not apply if surface is damp or contaminated. It is recommended to test all substrates prior to applications.

How to Use

For best results, ensure surface is clean, dry, and free of oil and grease. Cut nozzle to desired bead size, puncture inner seal. Apply with a caulking gun, forcing sealant onto the substrate, then tool if needed. Sealant will form a skin in 12 minutes and exhibit full cure within 48 hours. Can be applied in warm or cold conditions. Clean excess material with mineral spirits or similar solvent. It is the user's responsibility to thoroughly test any proposed uses with any and/or all substrates.

Prevention

Wash face, hands, and any exposed skin thoroughly after handling. Wear Personal Protective Equipment (PPE) like protective gloves, protective clothing, and face protection. Wear eye/face protection.

Precautions

IF ON SKIN: Wash thoroughly with soap and water. If skin irritates or rash occurs get medical attention. Remove contaminated clothing and wash before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do; continue rinsing. If eye irritation persists, get medical attention. IF SWALLOWED: Immediately call a Poison Center or doctor. DO NOT induce vomiting

Storage

Keep containers tightly closed in a dry, cool and well-ventilated place. Protect from moisture. Store locked up.

Included With

Twist-On Nozzle

 WARNING: This Product May Contain Chemicals Known to the State of California to Cause Cancer or Reproductive Harm. To Learn More Visit P65Warnings.ca.gov