BC180– 180° Glass-to-Glass Clamp with Square Profile – Compare to BGC180, CBU180

Description

• Glass shower clamp with square edges
• For 3/8” – 1/2” glass
• For use with tempered or tempered/laminated glass
• Solid brass
• Attaches fixed glass panels meeting at 180°
• A 3/4” hole must be drilled into the glass for installation
• Compare to BGC180, CBU180

Other Details

• Edge: Beveled profile
• Compare to: BGC180, CBU180

Technical Specifications

• Only tempered or laminated tempered glass may be used.
• Avoid using power tools during installation as these may damage the finish.
• A single set of gaskets is provided with the clamp and is intended for use with either 3/8” or 1/2” glass.

Product Details

This Glass Simple clamp is used to attach a fixed glass panel to an adjacent glass panel. The beveled profile coordinates with many of our other products.

Cleaning Your Glass Simple Hardware

• Dry hardware after use to minimize water spots and other discoloration.Wa
• Avoid harsh or abrasive cleaning agents, scrub brushes, etc. as these will damage the finish.
• Use a mild mixture of gentle liquid soap and water and test on an inconspicuous part of the hardware first.
• After washing, thoroughly rinse with clean warm water and buff dry.

⚠️ WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov