Description

Compare to BCU4, CBU4
Glass shower wall mount clamp with beveled edges
For 3/8” – 1/2” glass
For use with tempered or tempered/laminated glass
Solid brass
Attaches fixed panels for frameless glass applications
A 3/4” hole or 3/4”finger notch must be fabricated into the glass for installation

Downloadable Documents

Glass Simple BCU2X2 Glass Fabrication Template

Other Details

Edge: Beveled profile

Product Details

This Glass Simple fixed glass U-Clamp can be mounted to the ceiling, floor, or wall for installation of fixed glass panels on a frameless shower or other frameless applications. Leave a 5/32” to 3/16” gap between the glass and the adjoining surface and seal this with silicone.

Cleaning Your Glass Simple Hardware

Dry hardware after use to minimize water spots and other discoloration.
Avoid harsh or abrasive cleaning agents, scrub brushes, etc. as these will damage the finish.
Use a mild mixture of gentle liquid soap and water and test on an inconspicuous part of the hardware first.
After washing, thoroughly rinse with clean warm water and buff dry.

⚠️ WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov

Compare to:

BCU4, CBU4