CSO135 – Glass Simple 135° Sleeve Over Glass to Glass Clamp

Description

• Compare to SOGC135, SFC135, CS0C135BN
• Glass to glass 135 degree clamp
• For 5/16” (8mm) – 1/2” (12mm) glass
• Sleeve over
• Does not require glass fabrication
• Nylon tipped Allen screws tighten clamp
• Solid brass

Other Details

• Gaskets included

Product Details 

The CSO135 sleeve over 135 degree glass clamp can be used to hold panels together as a silicone caulk joint cures. It also prevents the panels from moving apart or from being poorly aligned. Please note that these clamps cannot replace support bars or headers on a glass shower enclosure.

Cleaning Your Glass Simple Hardware 

• Dry hardware after use to minimize water spots and other discoloration.
• Avoid harsh or abrasive cleaning agents, scrub brushes, etc. as these will damage the finish.
• Use a mild mixture of gentle liquid soap and water and test on an inconspicuous part of the hardware first.
• After washing, thoroughly rinse with clean warm water and buff dry.

⚠️ WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov