Description

Glass to glass
Adjustable – 90 degrees to 180 degrees
For 5/16” – 1/2” glass
For use with tempered or tempered/laminated glass
Sleeve over
Does not require glass fabrication
Nylon tipped Allen screws tighten clamp
Solid brass
Compare to SFCADJ, SOGC91

Other Details

Gaskets included
Compare to: SFCADJ, SOGC91

Product Details

The CSOA sleeve over adjustable glass clamp can be set anywhere between 90 and 180 degrees. It can be used to hold panels together as a silicone caulk joint cures. It also prevents the panels from moving apart or from being poorly aligned. Please note that these clamps cannot replace support bars or headers on a glass shower enclosure.

Cleaning Your Glass Simple Hardware

Dry hardware after use to minimize water spots and other discoloration.
Avoid harsh or abrasive cleaning agents, scrub brushes, etc. as these will damage the finish.
Use a mild mixture of gentle liquid soap and water and test on an inconspicuous part of the hardware first.
After washing, thoroughly rinse with clean warm water and buff dry.

⚠️ WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov

Compare to:

SOGC91, SFCADJ