GEN5O - Glass Simple Genesis Square Profile Shower Door Hinge, Offset Back Plate, Factory Set 5 Degree Positive Close

Description

• Compare to GEN544, GLEN05, HGTW50P
• Self-centering wall mount hinge with offset back plate
• 5 degree offset
• For 5/16”-1/2” (8mm-12mm) tempered glass
• Solid brass
  
  

Other Details

• Edge: Square profile

Technical Specifications

• If using 2 hinges, maximum door weight is 80 lbs and maximum door width is 28” (711 mm).
• If using 3 hinges, maximum door weight is 120 lbs, and maximum door width is 32” (813 mm).
• DO NOT exceed the maximum door weight OR door width for the number of hinges you are using.
• Only monolithic tempered glass may be used.
• Avoid using power tools during hinge installation as these may damage the finish.

Product Details

The Genesis series hinge offers appealing features. It is a wall mount hinge with offset back plate made of solid brass and available in various popular finishes. The pivot pin is preset for 5 more degrees of closure so that the panel closes with greater pressure against the jamb. The pivot pin can be reset by the customer to a standard 90 degree setting.

Cleaning Your Glass Simple Hardware

• Dry hardware after use to minimize water spots and other discoloration.
• Avoid harsh or abrasive cleaning agents, scrub brushes, etc. as these will damage the finish.
• Use a mild mixture of gentle liquid soap and water and test on an inconspicuous part of the hardware first.
• After washing, thoroughly rinse with clean warm water and buff dry.

Hinge Care

• Glass Simple hinges arrive pre-greased for quiet operation.
• In the event of a hinge squeaking, add a several drops of mult-purpose oil around the nylon washer.
• If the hinge is taken apart, the interior components should be lubricated with a little bit of white lithium grease.
• Avoid spray-on lubricants.