NFC38 - No Fab Glass Clamp for 3/8" Fixed Glass

Description

• Compare to NDC40, MC38
• Glass shower “no drill” wall mount clamp
• For 5/16” – 3/8” (8mm-10mm) glass
• Solid brass
• Attaches fixed panels on frameless glass shower enclosures

Technical Specifications

• Only tempered or tempered laminated glass may be used.
• Avoid using power tools during hinge installation as these may damage the finish.

Product Details

These clamps are used to attach a fixed panel to an adjacent wall without drilling holes in the glass. Rather, screws with nylon tips clamp the glass and hold it in place. Silicone must also be applied to seal and further secure the joint.

Warning When Using These Clamps

• At least the top, bottom, and one side of panel must have clamps in place.
• A hinged door cannot be attached to a panel that is installed with these clamps.
• During installation, ensure that there is appropriate structural support for the safe use of these clamps.

Cleaning Your Glass Simple Hardware

• Dry hardware after use to minimize water spots and other discoloration.Wa
• Avoid harsh or abrasive cleaning agents, scrub brushes, etc. as these will damage the finish.
• Use a mild mixture of gentle liquid soap and water and test on an inconspicuous part of the hardware first.
• After washing, thoroughly rinse with clean warm water and buff dry.