SCTW – Operable Wall Mount Transom Glass Clamp, Square Profile

Description

• Compare to SGC186, SPT1W, CMTGTWMB
• Glass shower transom clamp with square edges
• For 3/8” – 1/2” glass
• Solid brass
• Attaches movable transom to adjoining walls
• A 3/4” hole must be drilled into the glass for installation

Other Details

• Edge: Square profile

Technical Specifications

• Maximum transom dimensions for these clamps are 16” x 30”.
• DO NOT exceed the maximum transom dimensions
• Only tempered or laminated tempered glass may be used.
• Avoid using power tools during installation as these may damage the finish.
• A single set of gaskets is provided with the clamp and is intended for use with either 3/8” or 1/2” glass.

Product Details

This Glass Simple clamp is used to attach a pivoting transom to adjacent walls. The clamps must be installed at the transom’s mid-point for proper opening and closing. Operable transoms are used on steam enclosures to allow for release of steam.

Cleaning Your Glass Simple Hardware

• Dry hardware after use to minimize water spots and other discoloration.Wa
• Avoid harsh or abrasive cleaning agents, scrub brushes, etc. as these will damage the finish.
• Use a mild mixture of gentle liquid soap and water and test on an inconspicuous part of the hardware first.
• After washing, thoroughly rinse with clean warm water and buff dry.

⚠️ WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov