SCU2X2 – Glass Simple Glass Clamp, Square Profile

Description

• Glass shower wall mount clamp with square edges
• For 3/8” – 1/2” (10 mm to 12 mm) glass
• Solid brass
• Attaches fixed panels for frameless glass applications
• A 3/4” hole or 3/4”finger notch must be fabricated into the glass for installation
• Compare to SCU4, CGTW1

Other Details

• Edge: Square profile

Product Details 

This Glass Simple fixed glass U-Clamp can be mounted to the ceiling, floor, or wall for installation of fixed glass panels on a frameless shower or other framless applications. Leave a 5/32” to 3/16” gap between the glass and the adjoining surface and seal this with silicone.

Cleaning Your Glass Simple Hardware

• Dry hardware after use to minimize water spots and other discoloration.
• Avoid harsh or abrasive cleaning agents, scrub brushes, etc. as these will damage the finish.
• Use a mild mixture of gentle liquid soap and water and test on an inconspicuous part of the hardware first.
• After washing, thoroughly rinse with clean warm water and buff dry.

⚠️ WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov