VER5O – Glass Simple Verona Square Profile Wall Mount Hinge, Offset Back Plate, Factory Set 5 Degree Positive Close

Description

• Compare to V1E544, VEN05
• Self-centering wall mount hinge with offset back plate
• For 3/8”- 1/2” (10-12mm) tempered glass
• 5 degree offset
• Solid brass
• Strong design for wider doors
• Swings 90 degrees both ways

Other Details

• Edge: Square profile

Technical Specifications

• If using 2 hinges with 3/8” glass, maximum door weight is 100 lbs and maximum door width is 34” (864 mm).
• If using 2 hinges with 1/2” glass, maximum door weight is 100 lbs and maximum door width is 32” (813 mm).
• If using 3 hinges with 3/8” glass, maximum door weight is 130 lbs, and maximum door width is 34” (864 mm).
• If using 3 hinges with 1/2” glass, maximum door weight is 130 lbs, and maximum door width is 32” (813 mm).
• DO NOT exceed the maximum door weight OR door width for the number of hinges you are using.
• Only monolithic tempered glass may be used.
• Avoid using power tools during hinge installation as these may damage the finish.
• One thick gasket on each side is needed for 3/8” (10 mm) glass.
• One thin gasket on each side is needed for 1/2" (12 mm) glass.

Product Details

The Verona series hinge offers appealing features. It is a soild brass wall mount hinge with offset back plate, available in various popular finishes. The hinge comes with the pin set at 85 degrees for 5 degrees of extra pressure against the jamb. The pin can be adjusted for standard 90 degree door closure if desired.

Cleaning Your Glass Simple Hardware

• Dry hardware after use to minimize water spots and other discoloration.
• Avoid harsh or abrasive cleaning agents, scrub brushes, etc. as these will damage the finish.
• Use a mild mixture of gentle liquid soap and water and test on an inconspicuous part of the hardware first.
• After washing, thoroughly rinse with clean warm water and buff dry.

Hinge Care

• Glass Simple hinges arrive pre-greased for quiet operation.
• In the event of a hinge squeaking, add a several drops of mult-purpose oil around the nylon washer.
• If the hinge is taken apart, the interior components should be lubricated with a little bit of white lithium grease.
• Avoid spray-on lubricants.

⚠️ WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov